| Basic intermittent wiper switch | Off, intermittent, low-speed, and high-speed wiping; some designs include washer control. | Lever or knob, contact elements, return mechanism, housing, and electrical terminals. | Mounting arrangement, connector and pinout, number of positions, circuit type, and vehicle-specific control strategy. | Confirm the exact vehicle application, wiring diagram, switch-position logic, and connector keying. |
| Variable intermittent switch | Intermittent wiping with an adjustable delay, in addition to common continuous-speed settings. | Interval selector, contact assembly or signal-generating element, lever, housing, and connector. | Delay-control method, supported input signal, body-control or wiper-module interface, and position encoding. | Check that the vehicle’s wiper control unit supports the switch’s interval-setting signals. |
| Washer-integrated switch | Wiper speed and interval selection plus washer-pump activation, commonly by pushing or pulling the lever. | Wiper contacts, washer-actuation contact or signal circuit, lever mechanism, terminals, and housing. | Washer command type, pump-control circuit, connector layout, and whether the vehicle provides wipe-after-wash logic. | Match the washer-control function and electrical interface; do not assume similar-looking levers share the same pinout. |
| Multifunction column switch assembly | May combine wiper and washer controls with turn-signal, lighting, or other steering-column functions, depending on vehicle design. | One or more levers, switch contacts or sensors, shared housing, connectors, and mounting or clock-spring interfaces where applicable. | Column geometry, neighboring switch functions, steering-column trim, connector count, and vehicle electronics configuration. | Check whether the required part is a standalone stalk or a complete assembly, and verify all included functions. |
| Electronic or networked switch | Sends switch-state signals to a control module, which operates the wiper system; available functions vary by vehicle. | Position sensors or electronic contacts, circuit board where fitted, connector, housing, and control-module interface. | Signal protocol, module configuration, software or coding requirements, connector specification, and diagnostic compatibility. | Confirm the vehicle’s wiring and service information, and determine whether installation requires configuration or diagnostic checks. |
| Sensor-assisted automatic-wiper configuration | Provides an automatic-wipe mode when supported by a rain-sensing system; manual modes may also be present. | Mode selector, switch signal circuit, rain-sensor system, control module, and related vehicle wiring. | Sensor availability, module support, automatic-mode signal, vehicle configuration, and calibration requirements for the sensor system. | Verify that the vehicle is equipped for automatic wiping; a compatible-looking switch alone does not add the required sensor system. |
| Supplier evaluation checklist: Request application coverage, dimensional drawings, connector and pinout details, electrical specifications, material and environmental test information, quality-system documentation, traceability, warranty terms, and sample-validation support. Confirm fitment against the vehicle’s exact model year, trim, market, and equipment. |