| Mechanical piston pressure switch | Process pressure moves a piston against a spring; the mechanism changes the electrical contact state at the setpoint. | Hydraulic power units, industrial machinery, and some compressor systems where the selected model is rated for the pressure and medium. | Simple operation, no separate electronic controller required, and models are available for demanding pressure ranges. | Check maximum working pressure, pressure-cycle life, setpoint range, switching differential, seal compatibility, and electrical contact rating. |
| Mechanical diaphragm pressure switch | A flexible diaphragm responds to pressure and actuates a switch mechanism. | Gas and liquid systems, process equipment, and applications where diaphragm materials and pressure ratings match the service conditions. | Can provide sensitivity at comparatively modest pressures and can isolate the switching mechanism from the process medium. | Confirm the diaphragm’s pressure limit, material compatibility, temperature range, pulsation resistance, and required setpoint repeatability. |
| Electronic pressure switch | An electronic pressure sensor feeds switching electronics, which operate one or more outputs at configured thresholds. | Automated machinery, packaged equipment, and systems that need adjustable setpoints, status indication, or integration with a control system. | May offer a display, configurable switching points, diagnostic information, and multiple output options, depending on the model. | Verify pressure and temperature ratings, output type, supply voltage, connection, response time, environmental protection, and whether safety certification is required. |
| Differential pressure switch | Measures the pressure difference between two ports and changes state when the differential reaches its setpoint. | Filter monitoring, pump systems, and equipment where pressure drop or pressure difference is the variable to monitor. | Detects a change between two points rather than relying on a single absolute-pressure reading. | Check the differential setpoint range, maximum pressure on each port, allowable static pressure, port connections, and compatibility with the medium. |
| High-pressure limit switch with manual reset | A pressure switch trips at a configured high-pressure limit and remains in the tripped state until it is manually reset, if the model is designed for latching operation. | Systems designed to require operator acknowledgement after a high-pressure trip, subject to the equipment design and applicable regulations. | Helps prevent automatic restart after a trip when a manual-reset configuration is selected and correctly integrated. | Confirm reset method, trip and reset behavior, contact arrangement, ratings, and applicable equipment or code requirements. Manual reset is a feature, not a separate sensing technology. |