| Manual Walkie Pallet Jack | The operator pumps the tiller to raise the forks and pushes or pulls the load by hand. | About 2,000–2,500 kg | About 75–200 mm of lift above the lowered position | Manual hydraulic pump; no traction battery | Short-distance pallet movement, loading areas, and light-to-moderate warehouse work | Check fork length and width, wheel material, turning radius, and floor condition. Frequent heavy travel requires significant operator effort. |
| Standard Electric Walkie Pallet Jack | A battery-powered drive moves the truck; electric or powered hydraulic controls raise and lower the forks while the operator walks beside it. | About 1,500–3,000 kg | About 115–210 mm of lift above the lowered position | Rechargeable battery, electric traction motor, and lift system | Regular pallet transport in warehouses, distribution centers, and production facilities | Compare battery chemistry and capacity, charging time, duty cycle, travel distance, and available service support. |
| Compact or Short-Chassis Electric Walkie Jack | Uses powered travel and lifting in a shorter chassis designed to maneuver in restricted spaces. | About 1,000–2,000 kg | About 115–205 mm of lift above the lowered position | Battery-powered; compact drive and steering layout | Small warehouses, retail backrooms, delivery vehicles, and tight aisles | Confirm the turning radius, overall length, fork dimensions, and compatibility with the pallets used at the site. |
| High-Lift Walkie Pallet Jack | Raises a pallet to a higher working position for access or ergonomic handling; it is not a substitute for a stacker unless the model is designed and rated for stacking. | Often about 1,000–1,500 kg; capacity can decrease at greater lift heights | Typically up to about 800 mm on high-lift models | Manual or electric hydraulic lift; powered travel varies by model | Workstation feeding, order handling, and raising loads to a more accessible working height | Check rated capacity at the required height, load stability, leg or outrigger clearance, and whether the equipment is intended for stacking. |
| Low-Profile Walkie Pallet Jack | Uses a reduced fork height to enter pallets or skids with less ground clearance than standard models. | About 1,000–2,000 kg, depending on design | Lowered fork height may be about 35–55 mm; lift is generally for transport rather than elevated work | Manual or powered versions are available | Low-clearance pallets, certain skids, and loads that standard forks cannot enter | Measure the actual entry clearance and pallet openings. Reduced ground clearance may limit use on uneven floors. |
| Stainless-Steel or Corrosion-Resistant Walkie Jack | Moves pallets using manual or powered operation, with materials or protective finishes selected for wet or corrosive environments. | Commonly about 1,000–2,000 kg | Usually similar to the equivalent standard manual or electric design | Manual or battery-powered; material and component specifications vary | Food processing, pharmaceutical facilities, washdown areas, and other demanding environments | Verify the specified steel grade, seals, bearings, electrical protection, cleaning chemicals, and suitability for the site’s washdown procedures. |
| Scale-Equipped Walkie Pallet Jack | Combines pallet transport with an integrated weighing system; the scale displays the measured load weight. | Often about 1,500–2,500 kg; confirm the truck’s load rating separately from the scale range | Generally similar to the underlying manual or powered model | Load cells and display; manual or powered travel options | Internal inventory checks, receiving, dispatch, and approximate in-process weight checks | Check readability, stated accuracy, calibration requirements, operating temperature, and whether certified trade weighing is required. |