| 1. General-purpose 22m telescopic lift | About 21–22 m | About 17–19 m | Typically 230–300 kg | A hydraulically extended straight boom raises the platform and reaches outward, with ground-level controls for positioning and recovery. | Building maintenance, steel erection, exterior installation, and general construction on firm or moderately uneven ground. | Confirm the capacity at the required outreach; maximum platform capacity may be limited at some boom positions. |
| 2. High-outreach 22m-class lift | About 21–22 m | About 18–20 m | Typically 230–300 kg | A telescopic boom provides a long, relatively direct reach from the chassis, reducing the need to reposition where access is clear. | Reaching across obstacles, large building façades, industrial structures, and elevated work areas set back from the machine. | Compare the working envelope chart, not just the maximum outreach figure; outreach changes with height and load. |
| 3. Increased-capacity 22m-class lift | About 21–22 m | About 16–19 m | Some configurations offer up to about 450 kg in restricted working positions | Reinforced boom and platform configurations can carry more people or materials, while controls may restrict movement to maintain rated limits. | Installation work involving heavier tools or materials, subject to the machine’s load chart and local safety rules. | Check whether the stated capacity applies throughout the working envelope or only in a restricted zone. |
| 4. Rough-terrain 22m telescopic lift | About 21–22 m | About 16–19 m | Typically 230–300 kg | Four-wheel drive and terrain-oriented running gear help the machine travel over suitable uneven outdoor surfaces; the boom lifts and extends hydraulically. | Outdoor construction sites, infrastructure projects, and work areas with unpaved or uneven access routes. | Verify ground pressure, permitted slope, tire type, and gradeability against the actual site conditions. |
| 5. Compact-chassis 22m-class lift | About 21–22 m | About 15–18 m | Typically 230–300 kg | A more compact chassis is designed to improve access through tighter routes while retaining a telescopic boom for elevated reach. | Restricted construction sites, industrial yards, and projects with narrow access paths or limited maneuvering space. | Measure gate openings, turning areas, transport height, and total machine width before purchase or rental. |
| 6. Articulating-and-telescopic 22m-class lift | About 21–22 m | About 15–18 m | Typically 230–300 kg | A jib or articulated section, where fitted, helps position the platform around overhead or side obstacles; the main boom supplies elevation and reach. | Plant maintenance, pipework, building services, and work areas where a direct straight-line approach is blocked. | Check jib range, articulation geometry, and whether the platform can reach the required point without contacting obstacles. |
| 7. Heavy-duty outdoor 22m-class lift | About 21–22 m | About 16–19 m | Typically 230–300 kg; higher-capacity versions vary | A diesel engine powers travel and hydraulic functions for outdoor work, while the telescopic boom extends to position the platform at height. | Long-duration outdoor construction, industrial maintenance, and sites where electric charging infrastructure is unavailable. | Assess fuel use, emissions requirements, noise limits, service access, and whether a diesel machine is permitted on site. |