| Boltless / bin shelving | Low to medium; designed for cartons, bins, and hand-loaded items. Shelf ratings vary by span, material, and support. | Excellent; items are generally directly reachable from the aisle. | Low to medium | Small parts, picking areas, archives, and light-duty storage | Not intended for forklift-handled pallet loads or heavy industrial loads unless specifically engineered for them. |
| Longspan shelving | Medium; supports heavier or bulkier hand-loaded goods than typical light-duty shelving. Capacity is specified per shelf level. | Excellent; usually provides direct access to every stored item. | Low to medium | Bulk cartons, components, and manual-picking operations | Uses more aisle and floor space than high-density pallet systems. |
| Selective pallet racking | High; commonly engineered for pallet loads in the thousands of pounds per position, subject to beam, frame, height, and load configuration. | Excellent; each pallet position is accessible from the aisle. | Low to medium | Wide SKU variety, mixed inventory, and frequent stock rotation | Requires more aisles than systems that store pallets several positions deep. |
| Double-deep pallet racking | High; each position is engineered for its specified pallet load. The rack configuration does not automatically increase the rated capacity of each position. | Moderate; the rear pallet is reached through the front position, typically with a deep-reach truck. | Medium to high | Multiple pallets per SKU and operations seeking a balance of density and selectivity | Some pallets are less directly accessible, and specialized handling equipment is usually required. |
| Drive-in / drive-through racking | High; rails and frames are designed for the specified pallet loads and forklift operating conditions. | Limited; forklifts enter storage lanes, so pallets within a lane are not individually accessible from the aisle. | High | Large quantities of relatively few SKUs; drive-through layouts can support loading and unloading from opposite ends. | Lower selectivity and greater care needed during forklift operation inside lanes. |
| Push-back racking | High; load capacity is set by the engineered rack and cart system, including the number and weight of pallets per lane. | Moderate to limited; pallets are accessed from the aisle, but deeper pallets are retrieved in last-in, first-out order. | High | Several pallets per SKU where compact storage and aisle-side loading are useful | Inventory rotation is generally LIFO, and the system has more moving components than selective rack. |
| Pallet flow racking | High; lane capacity depends on the engineered rack, rollers, brakes, pallet specification, and load weight. | Good at the pick face; pallets move toward the unloading end, generally supporting first-in, first-out rotation. | High | High-throughput operations with multiple pallets per SKU and FIFO requirements | Higher system complexity; pallet condition and compatibility with the flow lanes matter. |
| Cantilever racking | Medium to high for long or awkward loads; arm and column ratings depend on load length, weight distribution, and rack design. | Good; open-front arms allow access along the length of stored goods. | Low to medium | Timber, pipe, furniture, and other long or irregular items | Not a general-purpose choice for standard pallet storage; long loads need suitable handling equipment. |