| Selective pallet rack | Low to moderate density; each pallet position is independently accessible. | Very high. Forklifts can reach individual pallet loads directly. | Low to moderate; a common baseline for comparison. | Uses wider aisles than most high-density systems, but is straightforward to reconfigure. | Warehouses with many SKUs, frequent picking, or mixed inventory. | Lower storage density because access aisles occupy floor space. |
| Double-deep rack | Moderate density; stores pallets two positions deep. | Moderate. The rear pallet is less accessible and usually requires a reach truck with a pantograph or similar attachment. | Moderate; equipment and operating requirements can add cost. | Reduces the number of access aisles compared with single-deep selective rack. | Operations with multiple pallets per SKU and sufficient inventory depth. | Rear loads are not directly accessible until front loads are moved. |
| Drive-in / drive-through rack | High density; pallets are stored several positions deep in forklift-accessible lanes. | Low to moderate. Loads within a lane are generally handled in sequence. | Moderate; the rack structure can be extensive, while fewer aisles may reduce space-related costs. | High floor-space use because the system minimizes access aisles. | Large quantities of a small number of SKUs, especially where full-lane or batch handling works. | Lower selectivity and greater care needed when forklifts enter the rack structure. |
| Push-back rack | High density; multiple pallets are stored deep on inclined carts or rails. | Moderate. Each lane typically holds one SKU, with pallets accessed from the aisle in last-in, first-out order. | Moderate to high compared with basic selective rack. | Uses fewer aisles while keeping loading and retrieval at the front face. | Operations seeking compact storage with several pallets per SKU and LIFO-compatible inventory. | Not suited to strict first-in, first-out rotation; moving components require maintenance. |
| Pallet flow rack | High density; gravity rollers move pallets through deep lanes. | High for FIFO flow: pallets are loaded at one end and retrieved at the other. | High; rollers, controls, and lane design add to the system cost. | High storage density, though separate loading and retrieval aisles are required. | High-throughput operations with date-sensitive goods or consistent FIFO requirements. | Needs suitable, consistent pallet loads and careful lane design and maintenance. |
| Mobile pallet rack | High density; rack rows move to open an access aisle where needed. | Moderate. Loads are accessible when the required aisle is opened. | High; powered bases, controls, safety equipment, and installation increase investment. | Very high floor-space use because fewer permanent aisles are needed. | Storage-heavy facilities with limited floor area and lower access frequency. | Access is less immediate than with fixed aisles, and powered equipment needs servicing. |