| 1 | Relative humidity measurement range | Many outdoor humidity sensors are designed to measure from 0% to 100% RH, although usable limits can depend on the model and environmental conditions. | A wide range supports measurements during both dry conditions and near-saturation events. | Confirm the specified measurement range and whether operation near condensation is permitted. |
| 2 | Measurement accuracy | Accuracy is model-dependent; product specifications commonly state an error in % RH, often with different limits across temperature ranges. | Accuracy affects humidity records, dew-point calculations, and comparisons between stations. | Request the accuracy specification, its temperature conditions, and calibration information rather than relying on a single headline value. |
| 3 | Sensor technology | Capacitive polymer sensing is widely used for electronic ambient humidity measurement. Other technologies are available for specialized measurement needs. | Technology influences long-term stability, response, environmental tolerance, and maintenance requirements. | Ask for the sensing principle and evidence that it is suitable for continuous outdoor exposure. |
| 4 | Response time | Response time varies with the sensing element, airflow, protective filter, and test method; manufacturers may specify a time to reach a stated percentage of a humidity change. | Faster response can better capture changing weather, while protective covers may slow air exchange. | Check the test conditions and response-time definition, including airflow and any fitted filter. |
| 5 | Operating temperature | Operating temperature limits are product-specific. The stated range should cover the station’s expected local climate. | Temperature affects sensor behavior and can influence humidity accuracy and reliability. | Verify the operating range and accuracy over that range, not just the sensor’s storage limits. |
| 6 | Condensation and high-humidity tolerance | Exposure to condensation can affect some sensing elements or cause temporary measurement errors; recovery behavior depends on the design. | Fog, rain splash, and rapid temperature changes can create demanding conditions at outdoor sites. | Ask about condensation resistance, recovery time, and any restrictions after exposure to liquid water. |
| 7 | Output and integration | Common interface options include analog voltage or current signals and digital interfaces; available outputs vary by product. | Compatible electrical outputs simplify connection to a data logger or weather-station controller. | Confirm signal type, supply voltage, connector, wiring, communication protocol, and documented data format. |
| 8 | Weather protection and radiation shielding | Outdoor installations commonly use a ventilated radiation shield to reduce direct solar heating while allowing ambient air to reach the sensor. | Direct sunlight and poor ventilation can produce readings that do not represent surrounding air conditions. | Check whether a shield is included or required, and follow the recommended mounting and airflow clearances. |
| 9 | Calibration and traceability | Calibration intervals depend on sensor stability, required data quality, exposure, and the station’s quality-control plan. | Periodic checks help identify drift and maintain consistent records over time. | Request calibration documentation, recommended recalibration intervals, and available field-check procedures. |
| 10 | Maintenance and service life | Filters, protective covers, and sensing elements may require inspection or replacement according to site conditions and manufacturer guidance. | Dust, salt, pollutants, and biological contamination can affect airflow and measurement performance. | Ask for cleaning instructions, replacement-part availability, warranty terms, and expected maintenance requirements. |