| At installation and after alterations | Posts, rails, brackets, and fasteners | Check that components are installed in the specified configuration, connections are secure, and the assembly has no visible damage or missing parts. | Keep installation and product documents. Have any concerns about anchorage, structural capacity, or code compliance reviewed by a qualified professional. |
| Every 6–12 months | Overall railing assembly | Look for loose connections, movement, bent or cracked components, sharp edges, and missing or damaged infill. | Tighten or replace parts only as permitted by the product instructions. Arrange prompt professional assessment if a component is damaged or the railing feels unstable. |
| Every 3–6 months; more often in coastal or heavily polluted locations | Finished aluminum surfaces | Check for accumulated dirt, salt deposits, staining, and scratches or chips in the protective finish. | Wash with clean water and a mild, non-abrasive detergent; rinse thoroughly and dry where practical. Avoid abrasive pads and cleaners not approved for the finish. |
| At least annually and after severe weather | Posts and attachment points | Check for movement, water entry, cracked surrounding material, or corrosion near anchors and connections. | Address drainage or water-entry problems. Do not conceal damaged substrates or alter anchors without qualified advice. |
| During each routine inspection | Fasteners and connections between dissimilar materials | Look for corrosion, staining, looseness, or signs of direct contact between incompatible metals. | Use compatible replacement hardware and isolation materials specified for the system. Avoid mixing metals or applying unapproved compounds. |
| Promptly when noticed | Scratches, chips, or coating damage | Note the location and extent of exposed metal, especially near joints, cut edges, or areas frequently exposed to moisture. | Clean and repair using a finish-compatible method recommended for the railing. Seek guidance for extensive damage or corrosion rather than covering it without assessment. |
| After storms, impact, or unusual loading | Rails, infill, posts, and supports | Check for deformation, loosened attachments, displaced infill, or new movement. | Restrict access to an area if the railing may be unsafe, and arrange inspection by a qualified professional before returning it to service. |
| Once a year | Maintenance records | Review inspection dates, cleaning, repairs, recurring issues, and any changes to the site or exposure conditions. | Keep dated notes and photographs. Adjust the inspection and cleaning frequency if the railing is exposed to salt spray, de-icing salts, industrial pollution, or frequent moisture. |