| Local streets and residential roads | 120–160 lm/W | 2700–3000 K | CRI ≥70; consider ≥80 where colour recognition is important | IP66 commonly specified for outdoor roadway luminaires | IK08 or higher, subject to exposure and vandalism risk | Use scheduled dimming or adaptive controls; verify compatibility with the chosen control interface. |
| Urban arterials and main roads | 130–170 lm/W | 3000–4000 K | CRI ≥70 is common; confirm project and local requirements | IP66 commonly used for exposed installations | IK08–IK10 depending on location and risk assessment | Consider networked dimming, fault reporting, and energy monitoring; check interoperability and cybersecurity provisions. |
| Pedestrian zones, plazas, and town centres | 110–150 lm/W | 2700–3000 K | CRI ≥80 is often preferred for colour appearance and recognition | IP66 for outdoor luminaires; verify seals and cable entries | IK09 or IK10 may be appropriate in high-contact public areas | Time-based dimming and presence-responsive control can suit variable-use areas; avoid abrupt changes in light level. |
| Cycleways and shared-use paths | 120–160 lm/W | 2700–3000 K | CRI ≥70; ≥80 can help with colour identification | IP66 commonly specified outdoors | IK08 or higher based on site conditions | Motion-responsive dimming may reduce energy use; ensure minimum light levels meet the applicable design standard. |
| Coastal or corrosive environments | 120–165 lm/W | 3000–4000 K, selected to suit the site | CRI ≥70 is common for roadway use | IP66; also assess corrosion protection, materials, and external finish | IK08 or higher; select based on windborne debris and access risks | Check controller and connector sealing, surge protection, and maintenance access for the local environment. |
| General replacement or retrofit projects | Compare tested system efficacy; roughly 120–170 lm/W is a practical screening range | Choose 2700–4000 K to match policy and site needs | CRI ≥70 is common for road lighting; confirm specification requirements | IP66 is a common outdoor target | IK08 or higher, selected according to installation risk | Confirm pole fit, driver dimming protocol, control-system compatibility, warranty, and replacement-part availability. |