| PON technology | Confirm the access technology supported by the service provider’s OLT and optical network. | Choose an ONT that matches the deployed system, such as GPON, XGS-PON, or EPON. These technologies are not automatically interchangeable. | The ONT must communicate with the provider’s optical line terminal and be provisioned for the correct network. |
| Shared PON line rate | Compare the technology’s nominal downstream and upstream line rates. | GPON: approximately 2.488 Gbit/s downstream and 1.244 Gbit/s upstream. XGS-PON: approximately 9.953 Gbit/s in each direction. EPON commonly uses approximately 1.25 Gbit/s in each direction. | These are shared PON-system line rates, not guaranteed speeds for one subscriber. Actual service speed depends on the plan, network loading, and equipment. |
| Ethernet ports | Check the number of ports and whether their negotiated speeds meet the router, switch, and service requirements. | For basic access, a 1 GbE port may be sufficient. For faster plans or multi-gigabit local links, consider 2.5 GbE or 10 GbE where supported end to end. | A port with a lower capacity than the subscribed service or connected equipment can limit throughput. |
| Optical compatibility | Verify the required optical class, wavelength, connector type, and allowable optical path loss with the provider. | Use the optical specifications approved for the deployed PON. SC/APC is common in fiber access, but the connector and optical requirements must be confirmed for the installation. | Incorrect optics or connector types can prevent link operation or cause poor optical performance. |
| Routing and Wi-Fi | Determine whether the ONT needs to provide only a fiber-to-Ethernet handoff or also routing and wireless access. | Choose a bridge-style ONT when a separate router will manage the network. Select an ONT with integrated routing or Wi-Fi only when those functions are required and supported by the provider. | Separating the ONT and router can make upgrades and troubleshooting easier; integrated features can reduce the number of devices. |
| Service features | Check for required voice, IPTV, VLAN, multicast, or management support. | Match the ONT’s supported interfaces and configuration features to the services actually supplied on the connection. | Physical link compatibility alone does not ensure that provider-specific services will work. |
| Capacity for users and devices | Estimate the number of wired devices, wireless clients, and simultaneous high-bandwidth activities. | Choose enough Ethernet ports and suitable router or Wi-Fi capacity for the household or office; add a switch or access point when needed. | The ONT’s optical capacity is only one part of performance. Internal networking equipment can also become a bottleneck. |
| Provider approval and provisioning | Confirm that the provider accepts the ONT model and can register and configure it on the network. | Obtain provider confirmation before purchasing or replacing an ONT. | Many access networks require authorized equipment and provider-side provisioning before service can be activated. |