| Fire-resistance type | For fuel-system locations requiring fire-resistant hose, verify the hose is identified as Type A and that its documentation confirms the applicable 2.5-minute fire-test rating. | A Type A designation indicates fire-resistant performance under the applicable hose standard; it is not a substitute for confirming suitability for the specific installation. | Read the complete hose marking and request test or conformity documentation when the rating is unclear. Do not infer a rating from appearance alone. |
| Standard and type marking | Look for a stated applicable standard, such as SAE J1527 or ISO 7840, together with the hose type or classification. | Standards define performance and test requirements. Similar-looking hoses may be intended for different marine fuel-system duties. | Check the marking against the vessel’s requirements and the current standard. Confirm the exact type with the hose documentation if the printed code is incomplete. |
| Fuel compatibility | Confirm that the hose is specified for the fuel in use, including gasoline or diesel and any applicable ethanol-blended fuel. | Fuel composition and exposure conditions can affect hose materials and service life. | Use the hose maker’s compatibility information for the exact fuel and application; do not assume that every fuel hose is suitable for every fuel. |
| Hose size and fit | Match the specified inside diameter to the fitting and system requirements. Check that the hose can be routed without kinking or being stretched. | Incorrect sizing or routing can restrict flow, strain connections, or damage the hose. | Verify dimensions before purchase and follow the hose manufacturer’s minimum bend-radius guidance. |
| Pressure and temperature limits | Check the hose’s marked or documented working-pressure and temperature limits for the intended service. | Limits vary by hose construction and application; a general appearance or type label does not establish every operating limit. | Select a hose whose documented ratings meet the system requirements, and install it within those limits. |
| Traceability markings | Check for legible product identification and any applicable size, standard, type, production or lot code, and rating information. | Clear markings help confirm the hose’s identity and support inspection, documentation, and replacement decisions. | Keep the hose markings visible where practical. If the type or rating cannot be identified, confirm it from reliable product documentation before installation. |
| Condition during inspection | Look for cracks, cuts, abrasion, soft or swollen areas, kinks, exposed reinforcement, fuel odor, dampness, or loose connections. | Visible damage, fuel odor, or leakage may indicate deterioration or a connection problem. | Investigate defects promptly and replace suspect hose with a correctly specified marine hose. Follow applicable service and inspection guidance. |