| Required air demand | Average and peak flow, expressed in cubic feet per minute (CFM) or litres per second (L/s), at the required pressure. | Base sizing on measured demand and simultaneous equipment use. Avoid selecting a compressor from motor power alone; compare delivered flow at the specified operating pressure. | Record demand during a representative production period and identify future capacity needs. Allow for leaks and planned expansion without routinely oversizing the system. |
| Operating pressure | Minimum pressure needed at the point of use, plus pressure losses through dryers, filters, piping, and fittings. | Every additional pressure increase raises energy use. Set the compressor discharge pressure only high enough to meet the actual system requirement. | Map pressure requirements across the system and check pressure at the most demanding point of use. |
| Room temperature and ventilation | Expected ambient temperature, cooling-air path, and the heat released by the compressor. | Install in a clean, dry, well-ventilated location within the compressor’s stated operating-temperature range. Hot intake air and restricted cooling can reduce performance or cause shutdowns. | Check the installation manual for temperature limits, cooling-air requirements, and any ducting instructions. Provide a route for hot discharge air to leave the room. |
| Service access and clearance | Space to open access panels and reach filters, oil separators, coolers, drains, and electrical components. | Required clearances vary by model and service procedure; there is no single universal clearance dimension. | Use the manufacturer’s layout drawing. Keep maintenance sides accessible and avoid placing equipment where doors, panels, or lifting points are obstructed. |
| Floor, foundation, and handling | Floor load capacity, levelness, vibration, transport route, and lifting access. | Rotary screw packages are generally designed for a level, stable base. Structural and anchoring needs depend on package size and site conditions. | Confirm the package’s operating weight and installation instructions with the building or facilities team. Check doorway, ceiling, and lifting clearances before delivery. |
| Electrical supply | Voltage, phase, frequency, motor rating, starting method, protective devices, and local electrical-code requirements. | Supply requirements differ by compressor model and region. Variable-speed units may also have specific installation and electromagnetic-compatibility requirements. | Have a qualified electrical professional verify the supply, cable sizing, disconnect, grounding, and protection against the unit’s nameplate and manual. |
| Air treatment and condensate | Required compressed-air quality, including moisture, particles, and oil carryover, plus condensate handling. | Choose dryers and filters to match the application. A refrigerated dryer is commonly used for general dry-air needs; lower dew points may require a desiccant dryer. Treatment adds pressure drop and maintenance needs. | Define the required air-quality class or dew point with the process owner. Provide approved condensate collection or treatment; do not discharge oily condensate directly where prohibited. |
| Oil and oil-filter service | Oil type, oil level, filter condition, operating hours, and service history. | Use the specified lubricant and replacement parts. Service intervals depend on the compressor design, operating conditions, and lubricant; contamination or high temperatures may shorten them. | Review the maintenance schedule in the unit manual and set up hour-based service tracking. Check for leaks and abnormal oil consumption during routine inspections. |
| Air filter and intake condition | Intake-filter restriction, dust exposure, and the cleanliness of air entering the compressor. | Inspect more frequently in dusty environments. A clogged intake filter can restrict airflow and increase operating stress. | Plan regular visual checks and replace or clean the filter only as directed by the manufacturer. Keep the intake away from dust, fumes, and hot exhaust air. |
| Separator and downstream filters | Pressure drop across the oil separator and air-treatment filters; oil carryover where relevant. | Rising pressure drop can indicate a loaded element. Replacement limits and intervals are model-specific and should follow the service manual. | Record differential-pressure readings where gauges or sensors are provided. Investigate unexpected oil carryover rather than treating it as a normal condition. |
| Coolers, drains, and condensate | Cooler cleanliness, cooling airflow, drain operation, and visible condensate leaks or blockages. | Dust or scale on heat-transfer surfaces can impair cooling. Condensate drains should be checked so water does not accumulate in the air system. | Include cooler inspection and drain testing in the planned maintenance routine. Isolate and depressurize equipment as directed before cleaning or servicing. |
| Controls, alarms, and energy use | Operating hours, load/unload behavior, pressure settings, alarms, and power consumption. | Frequent unloaded running or excessive cycling may indicate poor sizing, control settings, storage, or air leaks. Variable-speed control can help where demand varies, but suitability depends on the load profile. | Review controller data and investigate recurring alarms. Consider a professional leak survey and compare energy use with delivered air demand. |