| Carbon Steel | Iron-based material with carbon content that influences strength, hardness, and weldability. | Shielded metal arc welding (SMAW), gas metal arc welding (GMAW), flux-cored arc welding (FCAW), and submerged arc welding (SAW). | Clean surfaces before welding. Higher-carbon or thicker sections may need preheating and controlled cooling to reduce cracking risk. | Structural frames, machinery, pipelines, and general fabrication. |
| Stainless Steel | Chromium-containing steel with corrosion resistance; some grades also contain nickel or other alloying elements. | Gas tungsten arc welding (GTAW), GMAW, and SMAW. | Use suitable filler material and limit excessive heat input to help preserve corrosion resistance and reduce distortion. Avoid carbon-steel contamination. | Food-processing equipment, tanks, piping, and architectural components. |
| Aluminum Alloys | Lightweight, corrosion-resistant metals with high thermal conductivity and a surface oxide layer. | GTAW and GMAW; friction stir welding is also used for suitable components. | Remove oil and oxide with tools reserved for aluminum. Alloy and temper affect weldability; heat can reduce strength in some heat-treated alloys. | Transport structures, marine components, frames, and pressure vessels. |
| Copper and Copper Alloys | Highly conductive metals that transfer heat rapidly; some copper alloys have different strength and corrosion properties. | GTAW, GMAW, and brazing processes, depending on the material and joint design. | High thermal conductivity may require greater heat input or preheating for thicker sections. Select procedures appropriate to the specific alloy. | Electrical components, heat exchangers, plumbing, and fittings. |
| Titanium Alloys | High strength-to-weight ratio and good corrosion resistance; reactive to oxygen and nitrogen at elevated temperatures. | GTAW and GMAW, typically with carefully controlled shielding. | Thorough cleaning and effective shielding of the weld and hot surrounding metal are essential to prevent contamination. | Aerospace components, chemical equipment, and medical devices. |
| Nickel-Based Alloys | Designed for demanding heat, corrosion, or oxidation conditions; composition varies by alloy family. | GTAW, GMAW, and SMAW using compatible welding consumables. | Control heat input and joint cleanliness. Filler selection and procedure depend on the alloy and service environment. | High-temperature equipment, chemical processing systems, and power-generation components. |
| Cast Iron | Iron-carbon material that is relatively brittle; graphite content and casting structure affect its behavior. | Specialized SMAW or GTAW procedures; brazing may be selected for some repairs. | Cracking is a concern. Repair procedures may use preheating or a controlled low-temperature approach, depending on the casting and application. | Engine blocks, pump housings, machine bases, and repair work. |