| 1 | Match the sensing technology to the target | Target material, shape, color, and surface | Inductive sensors detect metal targets. Capacitive sensors can detect many non-metallic materials as well as metals. Photoelectric and ultrasonic sensors suit a wider range of targets, but performance depends on the application and sensor design. |
| 2 | Confirm operating voltage and wiring | Supply range, AC or DC, wire count, and connection type | Compare the sensor’s rated supply range with the control system. Many industrial DC sensors use a 10–30 VDC range, but this is not universal; follow the exact datasheet and wiring diagram. |
| 3 | Match the output to the input module | PNP or NPN, normally open or normally closed, and output type | A PNP output sources current; an NPN output sinks current. Check the PLC or controller input requirements, switching logic, and whether a discrete, analog, or communication output is needed. |
| 4 | Allow for the real sensing distance | Rated range, target size, alignment, and installation conditions | Do not assume the nominal range applies to every target. For inductive sensors, target material and dimensions can affect the usable range; allow an operating margin and check the manufacturer’s correction factors. |
| 5 | Check speed and response requirements | Switching frequency, response time, and target travel speed | The sensor must respond quickly enough for the application. Compare its specified response time or maximum switching frequency with the target’s speed and the controller’s input requirements. |
| 6 | Review repeatability and hysteresis | Positioning tolerance and switching-point stability | Repeatability describes how consistently a sensor switches under the stated conditions. Hysteresis is the difference between switching on and switching off; consider both when setting close-position limits. |
| 7 | Choose suitable ingress protection | IP rating and exposure to dust, water, or cleaning | Select an enclosure rating for the actual installation. Under IEC 60529, IP67 includes dust protection and temporary immersion under specified test conditions; it does not by itself establish suitability for every washdown or chemical exposure. |
| 8 | Verify temperature and chemical compatibility | Operating temperature, housing material, cable, and seal materials | Compare the rated temperature range with the equipment’s ambient and process conditions. Check material compatibility with oils, detergents, solvents, or other chemicals present at the installation site. |
| 9 | Confirm mounting and connector details | Thread or body size, flush or non-flush mounting, connector, and pinout | Check available space, mounting clearances, and nearby metal for inductive sensors. A connector size alone does not guarantee a matching pinout, so confirm the connector coding and wiring arrangement. |
| 10 | Assess safety, approvals, and maintenance needs | Required safety function, certifications, diagnostics, and replacement access | For a safety-related application, select equipment appropriate to the documented risk assessment and verify the required safety ratings and system architecture. Also consider availability of documentation, replacement parts, and access for inspection. |