4130 Chromium-molybdenum steel | C 0.28–0.33; Mn 0.40–0.60; Cr 0.80–1.10; Mo 0.15–0.25; Si 0.15–0.35 | Good strength-to-weight ratio and weldability when properly processed; used for tubing, structural components, and machinery parts. | Seamless mechanical tubing, bar, and forgings | SAE J404 chemistry; ASTM A519 may apply to seamless mechanical tubing. Confirm the exact product specification and grade designation. | Specify tube dimensions, wall thickness, delivery condition, heat treatment, dimensional tolerances, and any required nondestructive examination. |
4140 Chromium-molybdenum steel | C 0.38–0.43; Mn 0.75–1.00; Cr 0.80–1.10; Mo 0.15–0.25; Si 0.15–0.35 | Hardenable alloy steel with good strength and toughness in suitable heat-treated conditions; common in shafts, gears, and machine components. | Bar, forging, and seamless mechanical tubing | SAE J404 chemistry; ASTM A322 is commonly referenced for alloy-steel bars, and ASTM A519 may apply to mechanical tubing. | Define whether the material is annealed, normalized, or quenched and tempered; state hardness or mechanical-property requirements and test method. |
4340 Nickel-chromium-molybdenum steel | C 0.38–0.43; Mn 0.60–0.80; Ni 1.65–2.00; Cr 0.70–0.90; Mo 0.20–0.30 | High hardenability and strength potential after suitable heat treatment; used for highly stressed shafts, gears, and forged components. | Bar and forging | SAE J404 chemistry; ASTM A322 may apply to alloy-steel bars. Verify the applicable product-form specification and revision. | Specify section size, heat-treatment route, required strength or hardness, impact testing if needed, and allowable decarburization or surface condition. |
8620 Nickel-chromium-molybdenum steel | C 0.18–0.23; Mn 0.70–0.90; Ni 0.40–0.70; Cr 0.40–0.60; Mo 0.15–0.25 | Low-carbon case-hardening steel; commonly used for carburized gears, pinions, and other components requiring a hard surface and tougher core. | Bar, forging, and selected mechanical tubing products | SAE J404 chemistry; ASTM A322 may apply to alloy-steel bars. Confirm product form, grade, and any supplementary requirements. | State whether the order is for untreated stock or a case-hardened component; for treated parts, define case depth, surface hardness, and test locations. |
52100 High-carbon chromium bearing steel | C 0.98–1.10; Mn 0.25–0.45; Cr 1.30–1.60; Si 0.15–0.35; P and S typically limited by the ordered specification. | High-carbon chromium steel used for bearing and wear-resistant applications; cleanliness and heat treatment are important to performance. | Bearing-quality bar, tube, and other forms as specified | ASTM A295 covers high-carbon anti-friction bearing steels. Confirm the ordered grade, product form, and required quality level. | Define cleanliness or inclusion-rating requirements, heat-treatment condition, hardness, dimensional tolerances, and any ultrasonic inspection criteria. |