| Single-stage centrifugal degasser | A rotating element creates a centrifugal field. The denser liquid is driven outward while lower-density gas moves toward the lower-pressure central region, where it can separate and be vented. | Continuous processing where the incoming liquid contains free or entrained gas and a compact mechanical separator is desired. | Continuous operation; compact footprint; separation can be rapid when the feed and operating conditions are suitable. | Performance depends on rotational speed, flow rate, liquid properties, and gas loading. It may not remove dissolved gas effectively without an additional mass-transfer step. |
| Multi-stage centrifugal configuration | Liquid passes through successive separation stages. Each stage provides another opportunity for gas bubbles to migrate away from the liquid under centrifugal acceleration. | Applications requiring additional gas removal or more controlled separation than a single stage can provide. | Can improve overall separation by repeating the gas-removal process; may handle changing gas loads more effectively than a single stage when properly designed. | More components and controls can increase equipment complexity, maintenance needs, and pressure loss. The actual benefit depends on the feed and stage design. |
| Vacuum-assisted centrifugal degasser | Centrifugal action separates free gas from the liquid, while reduced pressure encourages dissolved or finely dispersed gas to leave the liquid. A vacuum system removes the released gas. | Liquids requiring deeper degassing than mechanical centrifugal separation alone can typically achieve. | Combines density-based separation with lower-pressure gas release; can address both entrained gas and some dissolved gas, depending on the liquid and process conditions. | Requires vacuum equipment and control of air ingress. Vacuum level, temperature, residence time, and liquid volatility affect performance; foaming may require attention. |
| Inline centrifugal gas–liquid separator | A swirling or rotating flow creates a radial density gradient. Gas collects toward the core of the flow while liquid moves toward the outer region; separate outlets route the phases away. | Continuous pipelines or process lines where a vessel-based batch step is undesirable and the flow can be kept within the separator’s operating range. | Can be integrated directly into a process line and may require less floor space than a large separation vessel. | Separation is sensitive to flow rate, flow regime, pressure, and gas fraction. It generally separates free gas rather than removing gas that remains dissolved in the liquid. |
| Centrifugal degasser with upstream conditioning | Feed conditioning first promotes bubble formation or coalescence; centrifugal force then helps separate the resulting gas bubbles from the liquid. | Feeds with fine bubbles, variable gas content, or properties that make direct separation difficult. | Conditioning can make bubbles easier to separate and may improve process stability when matched to the liquid and operating conditions. | Additional conditioning equipment can add cost and maintenance. The selected method must be compatible with the liquid and should not create unwanted emulsions, foam, or contamination. |
| Selection checklist | Define whether the target is free gas, entrained bubbles, or dissolved gas. Then compare required outlet gas content, liquid flow and pressure, viscosity, temperature, foaming tendency, available utilities, maintenance access, and allowable pressure loss. Request performance data for the actual process conditions and confirm how the stated result is measured. |
| Note: Equipment terminology and internal geometry vary by application and supplier. Centrifugal separation is primarily driven by phase-density differences; dissolved-gas removal may require vacuum, heating, or another mass-transfer method. |