| 1. Specify the finish clearly | State the required surface finish, appearance, and viewing conditions—not just “mirror finish.” | ASTM A480/A480M uses finish designations including No. 8 for a highly reflective, polished surface. The designation does not by itself guarantee a particular numerical reflectivity or roughness value. | Is the sheet supplied to ASTM A480/A480M No. 8, or to another documented finish requirement? Can the supplier provide a representative sample? |
| 2. Understand finish terminology | Distinguish a polished mirror surface from bright-annealed or general-purpose finishes. | In EN 10088-2 terminology, 2R refers to a bright-annealed finish and 2P to a polished finish. These descriptions are not automatically interchangeable with ASTM No. 8; confirm the actual surface and specification. | Which standard and finish designation appear on the order documents, and what surface appearance does the designation mean for this product? |
| 3. Choose a grade for the service environment | Consider moisture, cleaning chemicals, coastal exposure, and chlorides. | Common choices include Type 304 for many indoor and general-purpose uses, Type 316 for improved resistance to chloride-related corrosion, and Type 430 for some less-corrosive applications. Grade selection should match the actual environment. | Is the material certified to the specified grade, such as ASTM A240/A240M Type 304 or Type 316? Is the environment likely to involve salt or chlorides? |
| 4. Confirm thickness and tolerances | Specify nominal thickness, sheet dimensions, and applicable thickness tolerances. | Stainless sheet tolerances depend on the governing specification, product dimensions, and ordering requirements. ASTM A480/A480M includes general requirements and dimensional provisions; do not assume every thickness has the same tolerance. | What are the permitted thickness and flatness tolerances for the ordered size, and how will they be verified? |
| 5. Define inspection and acceptance criteria | Agree on how scratches, dents, haze, polishing lines, and distortion will be judged. | Mirror appearance can vary with polishing method, viewing angle, lighting, and inspection distance. A single roughness value or finish label does not fully describe visual image quality. | Can the order include an approved reference sample, inspection lighting, viewing distance, and criteria for visible defects? |
| 6. Check protection and handling | Verify surface protection during packing, transport, storage, and fabrication. | Protective film can reduce handling damage, but film type, adhesive, exposure time, and removal conditions matter. Film protection does not replace careful handling or suitable storage. | Is the polished face protected? Is the film compatible with the intended processing and storage period, and when should it be removed? |
| 7. Request traceable documentation | Match the delivered sheet to the order specification and material records. | For specified stainless sheet, review the material test report for grade and applicable specification, along with identification that links the report to the supplied material. Surface-finish requirements should also be documented. | Will the shipment include a material test report, grade and specification details, dimensions, and the agreed finish designation? |