| 1. Thermal performance | Compare the whole-window U-value (Uw), not just the frame (Uf) or glazing (Ug). Lower U-values indicate less heat transfer; confirm the stated units, typically W/(m²·K). | A test report or calculation for the proposed size, frame, glazing, and spacer configuration. |
| 2. Air permeability | Check the tested air-leakage performance and classification. Compare results only when test methods and specimen configurations are equivalent. | A report for the complete operable window; EN 12207 is a commonly used classification standard in Europe. |
| 3. Water tightness | Review the tested resistance to water penetration and the pressure level achieved, considering the project’s exposure and local requirements. | A complete-window test report; EN 12208 is commonly used to classify water-tightness performance in Europe. |
| 4. Wind-load resistance | Confirm design pressure, deflection, and safety performance for the specified window size and installation conditions. | Structural calculations or test results for the relevant configuration; EN 12210 is commonly used for European classification. |
| 5. Thermal-break design | Ask how the aluminum frame reduces heat transfer between its exterior and interior sections, and whether the design suits the project’s climate and condensation requirements. | Section drawings, system specifications, and thermal calculations for the complete window assembly. |
| 6. Glazing options and safety | Compare available glass make-up, thickness, low-emissivity coatings, acoustic options, and safety-glazing requirements for the intended location. | Glass build-up details and documentation showing compliance with applicable local building and safety codes. |
| 7. Hardware and operation | Assess hinges, locking points, handles, opening limits, corrosion suitability, and the availability of replacement parts. | Hardware specifications, maintenance guidance, and relevant durability or cycle-test documentation. |
| 8. Finish and corrosion protection | Compare finish type, color consistency, surface preparation, and suitability for the installation environment, especially coastal or industrial locations. | Finish specifications, applicable test results, care instructions, and written warranty terms. |
| 9. Quality control and compliance | Check production inspections, traceability, and conformity documentation required in the destination market. A management-system certificate alone does not prove a window’s performance. | Product-specific test reports and declarations where applicable; verify the scope and validity of any quality-management certificate. |
| 10. Delivery, warranty, and support | Compare confirmed lead times, packaging and shipping arrangements, installation guidance, warranty coverage, service response, and spare-parts availability. | A written quotation, delivery schedule, warranty document, service contact process, and clearly stated exclusions. |