| Profile 01 | Heat-shrink butt splice | Inline metal barrel with an insulating heat-shrink sleeve; adhesive-lined versions are also available. | Joining two compatible conductors in wiring harnesses, equipment, and vehicle electrical systems. | Match the barrel to the conductor material and size. Confirm the specified crimping tool, wire range, and sealing instructions. | Check the product datasheet for applicable connector and insulation approvals. UL 486C covers splicing wire connectors; applicability depends on the product listing. |
| Profile 02 | Heat-shrink ring terminal | Crimp barrel joined to a ring tongue, with a sleeve that shrinks around the wire end after installation. | Bolted electrical connections in control panels, vehicles, appliances, and machinery. | Select the ring hole to match the stud or fastener and the barrel to match the conductor. Verify installation clearance and required tightening torque for the connection. | Check the terminal’s stated wire range, material, and approval marks. UL 486A-486B applies to certain wire connectors; confirm the specific product is covered. |
| Profile 03 | Heat-shrink fork terminal | Crimp barrel with an open-ended fork tongue and insulating shrink sleeve. | Connections to screw terminals where a forked tongue is suitable for the terminal design. | Confirm that the fork dimensions and terminal screw size are compatible. Use the specified conductor range and crimp profile. | Verify product-specific certifications and installation requirements. Approval of one terminal design does not automatically apply to another. |
| Profile 04 | Heat-shrink female disconnect | Insulated female blade receptacle with a heat-shrink sleeve; some designs include an internal locking feature. | Removable connections to compatible male tabs in appliances, automotive wiring, and control equipment. | Match tab width and thickness, conductor size, and intended mating force. Confirm whether the receptacle is designed for the application’s vibration conditions. | Check the supplier’s dimensional drawing and approval documentation. Do not assume compatibility based only on visual appearance. |
| Profile 05 | Heat-shrink male disconnect | Male blade contact with an insulated barrel or sleeve that shrinks around the conductor end. | Quick-disconnect wiring assemblies that mate with a compatible female receptacle. | Match blade dimensions and conductor range to the mating receptacle. Ensure the connection is fully seated and protected from unintended contact. | Confirm applicable product ratings and approvals from the datasheet; ratings depend on the specific terminal and installation. |
| Profile 06 | Heat-shrink bullet connector | Male or female cylindrical contact with a crimp barrel and shrinkable insulation. | Detachable wiring connections in harnesses and equipment where a compact inline connection is needed. | Use matching male and female components from compatible dimensional series. Verify conductor range, retention, and environmental requirements. | Use the product drawing and test documentation to confirm mating compatibility and any stated environmental or electrical ratings. |
| Profile 07 | Heat-shrink pin terminal | Crimp barrel with a narrow metal pin and an insulating shrink sleeve. | Connecting stranded conductors to compatible terminal blocks or devices designed for pin-style terminations. | Check pin diameter and length against the receiving terminal. Follow the specified strip length and crimp procedure. | Confirm acceptance by the receiving equipment and check the terminal manufacturer’s documentation for applicable approvals. |
| Profile 08 | Heat-shrink flag terminal | Angled or side-entry contact connected to an insulated crimp barrel. | Connections in confined spaces where a straight terminal may not provide adequate routing clearance. | Check the terminal’s orientation, contact dimensions, conductor size, and clearance after installation. | Use dimensional drawings and application-specific documentation; the angled form does not itself define an electrical rating. |
| Profile 09 | Heat-shrink step-down butt splice | Inline splice designed to connect conductors of different specified sizes, with a heat-shrink insulating sleeve. | Harness repairs or transitions between conductors when the selected splice is rated for both wire sizes. | Check that each side’s conductor falls within its own stated range. Do not substitute a standard butt splice unless its datasheet allows the combination. | Verify the connector’s listed wire combinations, crimping instructions, and any applicable connector approvals. |
| Profile 10 | Heat-shrink closed-end connector | Crimp-style connector that joins one or more conductors and encloses the connection end beneath insulating material. | Ending or grouping conductors in harnesses and control wiring where a closed termination is appropriate. | Confirm the permitted number and size of conductors, conductor preparation, and crimp method. Check whether the design is intended to provide a sealed enclosure. | Review the product datasheet for wire combinations, environmental claims, and certifications; sealing performance is product-specific. |