| 1 | Flexible Module Construction | Flexible LED modules use a bendable circuit structure and are assembled into a display using a product-specific support or mounting system. | Construction affects how a display conforms to curved, cylindrical, or other non-flat surfaces. | Ask for the permitted bending direction, installation method, module dimensions, and mechanical limits. |
| 2 | Pixel Pitch and Resolution | Pixel pitch is the center-to-center distance between adjacent pixels. Smaller pitch generally provides higher pixel density over the same area. | Pixel pitch influences image detail and the viewing distance at which individual pixels are less noticeable. | Check the actual pixel pitch, pixel configuration, display dimensions, and recommended viewing distance. |
| 3 | Minimum Bend Radius | Flexible displays have a model-specific minimum bend radius; the allowable curvature depends on module design and installation conditions. | Exceeding the approved curvature can stress components or connections and may affect reliability. | Obtain the manufacturer’s bend-radius specification and confirm whether it applies horizontally, vertically, or in both directions. |
| 4 | LED Packaging | LED display products may use surface-mount device (SMD) packages; some product families also offer other packaging approaches, such as chip-on-board (COB). | Packaging can affect pixel structure, surface protection, maintenance, and the intended operating environment. | Confirm the packaging type for the exact model and review its service and environmental limitations. |
| 5 | Refresh Rate and Grayscale | Refresh behavior and grayscale performance depend on the display modules, driving electronics, and compatible control system. | These characteristics influence motion rendering and tonal transitions; camera recording can also reveal flicker or scan artifacts. | Request documented specifications for the complete display system and test it with the intended camera and content. |
| 6 | Brightness and Calibration | LED display brightness is specified for a particular product and operating condition. Calibration can help maintain consistent color and brightness across modules. | Appropriate brightness and uniformity support legibility and a consistent appearance in the installation environment. | Check the rated brightness, calibration process, uniformity criteria, and any operating limits stated in the datasheet. |
| 7 | Viewing Angle and Color Consistency | Viewing-angle performance depends on LED package, optical design, and measurement method. | Wide or off-axis viewing may be important for curved installations where viewers are not directly in front of the screen. | Review viewing-angle data and evaluate color and brightness from the expected audience positions. |
| 8 | Maintenance and Module Replacement | Depending on the design, LED displays may support front or rear servicing; module access is determined by the mounting and cabinet system. | Service access affects installation planning, repair time, and the space required behind or around the display. | Confirm the supported service direction, replacement procedure, required tools, and availability of compatible spare modules. |
| 9 | Environmental Protection | Ingress protection (IP) ratings apply to tested product configurations and specify protection against defined solid-object and water ingress conditions. | Environmental suitability depends on the full installed system, not just the LED module. | Verify the documented IP rating for the exact configuration, including seams, connectors, power supplies, and installation orientation. |
| 10 | Control System and Compatibility | A display system combines LED modules with driving, receiving, and control components that process and distribute image data. | Compatibility affects setup, supported content formats, system integration, and troubleshooting. | Check input and control requirements, supported software, signal connections, configuration files, and system-level support documentation. |