| Padding | Foam cups may use molded, laminated, or cut-and-sew construction. Padding can be graduated, with more volume toward the lower or outer cup. | Padding adds volume and can direct the bust upward or toward the center. The effect depends on pad shape, placement, and cup fit. | Control foam thickness, density, symmetry, and bonding. Cup shape should remain consistent after sewing and laundering. |
| Removable pads | Lightweight inserts sit in an inner cup pocket, commonly accessed through an opening near the cup edge. | Allow the wearer to adjust or remove added volume. The pocket helps keep the insert positioned during wear. | Check pocket dimensions, opening finish, insert retention, and whether the pad remains flat without twisting. |
| Underwire | A shaped wire is enclosed in a fabric channel along the lower cup and center front. Wire shapes and lengths vary by size and design. | The wire supports and defines the cup base; it does not create lift by itself. Lift also depends on cup, band, and strap construction. | Match wire shape to the cup pattern, secure channel ends, and check for wire exposure, discomfort, or distortion after testing. |
| Cup and cradle | Contoured cups may be paired with a cradle or frame that connects the cups to the band. | A well-matched cup and cradle help hold the bust in position and distribute support across the garment. | Assess cup volume, center-front height, seam placement, and size grading on fit models across the intended size range. |
| Band | Elastic fabric around the torso provides the bra’s main anchor. Band width and firmness vary by style and size. | A stable, properly fitted band helps keep cups and underwire in place. A loose band can reduce support and cause the back to ride up. | Check elastic recovery, stretch consistency, seam strength, and fit after repeated wear and wash cycles. |
| Straps | Adjustable shoulder straps may use elastic, sliders, and rings; strap width can vary by size and design. | Straps help stabilize the cups, but should not carry all the garment’s support or dig into the shoulders. | Verify adjustability, hardware security, strap placement, and comfort under movement and load. |
| Materials | Common components include nylon or polyester blends, elastane, lining fabrics, foam, and elastic trims. | Stretch, recovery, breathability, and hand feel affect how the bra fits and maintains its shape. | Confirm material specifications, color consistency, trim compatibility, and applicable restricted-substance requirements. |
| Fit and quality checks | Development typically includes pattern review, sample fitting, size grading, and in-line and final inspections. | These checks help confirm that padding, wire, band, and straps work together for the intended fit. | Agree on measurement tolerances and inspection criteria; test fit, seam strength, component security, and care-label performance. |