| High-yield deformed rebar coil | EN 10080; grade designations such as B500B or B500C may be specified under applicable national standards | Ribbed surface for mechanical bond with concrete; strength and ductility requirements depend on the specified grade and standard. | Small diameters are commonly supplied in coils; availability, diameter range, coil weight, and dimensions vary by mill and market. | Reinforcement cages, links, stirrups, and other components made by straightening and bending equipment. | Confirm the governing standard, grade, nominal diameter, rib requirements, and test documentation. |
| High-ductility deformed rebar coil | Examples include B500C under applicable European or national specifications | Designed to meet specified ductility requirements in addition to strength requirements; the exact limits are standard-specific. | Check that the coil product itself is certified for the requested grade and that processing does not compromise required properties. | Seismic detailing and structures where the project specification calls for higher ductility. | Verify the required ductility class, elongation or tensile-to-yield criteria, and project-specific acceptance rules. |
| Weldable reinforcing steel coil | ASTM A706/A706M, where coil supply is available and accepted for the project | Specified for applications requiring controlled tensile properties and enhanced weldability; welding procedures still need to follow project requirements. | Coil availability is market- and supplier-dependent. Confirm product form and processing requirements before ordering. | Reinforced concrete construction with specified welding or ductility requirements. | Check the edition of the standard, chemical and mechanical test results, weld procedure requirements, and approval of coil form. |
| General-purpose deformed reinforcing bar coil | May be ordered to standards such as ASTM A615/A615M or a locally adopted reinforcing-steel standard, if coil form is permitted | Deformed bar intended to develop bond with concrete; grade designations and acceptance limits vary by standard. | Not every grade or diameter is offered in coils. Confirm that the specified standard permits the supplied product form for the intended use. | Concrete reinforcement where the design specification permits the selected grade and product form. | Match the grade and standard to the structural drawings; review diameter tolerances, mechanical tests, and traceability documents. |
| Plain-round reinforcing coil | Grade and standard depend on the destination market and project specification | Smooth surface rather than transverse ribs; bond behavior differs from deformed reinforcement, so use must be specified by the designer. | Often selected for small fabricated items; confirm whether the project accepts plain bar and whether the required diameter is available in coil form. | Fabricated reinforcement components or applications specifically designed for plain-round steel. | Do not substitute for deformed rebar without design approval; verify grade, dimensions, and intended use. |