| Cylindrical, single-enveloping | About 5:1–100:1 per stage, depending on design | A cylindrical worm meshes with a wheel. This is a widely used, relatively straightforward arrangement. | Conveyors, packaging equipment, machine drives, and general speed reduction | ISO 14521 provides calculation methods for the load capacity of cylindrical worm gear pairs. Check the applicable failure modes and input data for the specific geometry and operating conditions. |
| Multi-start cylindrical worm | Commonly used for moderate ratios; the ratio depends on worm starts and wheel teeth | More worm starts generally increase the lead angle and can improve efficiency, but reduce the ratio for a given wheel tooth count. | Drives where greater speed or efficiency is preferred over a very high single-stage reduction | Rate using the actual worm starts, lead angle, materials, lubrication, speed, and duty cycle. Do not infer load capacity from ratio alone. |
| Double-enveloping (globoidal) worm gear | Application-specific; ratios vary by geometry and design | The worm is shaped to wrap around the wheel, increasing tooth contact area when correctly manufactured and aligned. | Specialized, high-torque or precision drives | Its geometry differs from a standard cylindrical pair. Confirm the relevant calculation method and whether ISO 14521 applies before using its ratings. |
| Multi-stage worm reducer | Overall reductions can exceed 100:1; each stage has its own ratio | Two or more reduction stages combine to obtain a larger overall ratio. Added stages affect size, losses, and thermal behavior. | Compact drives requiring substantial speed reduction | Assess each stage and the complete unit, including efficiency and heat generation. A single-stage rating should not be treated as the rating of the assembled reducer. |
| Compact or miniature worm gear set | Often selected within the 5:1–100:1 range, subject to size and tooth geometry | Designed for restricted space and relatively small dimensions; allowable torque depends strongly on material, support, and heat dissipation. | Small actuators, instruments, and compact positioning mechanisms | Use the manufacturer’s verified dimensions and material data. Small size alone does not establish a safe load rating or service life. |