| Single-Sided ASA/ABS Co-Extruded Sheet | A weather-resistant ASA outer cap co-extruded onto an ABS structural core. | Combines an exterior ASA surface with the impact resistance and formability of an ABS core; the cap helps protect the exposed face from weathering and UV exposure. | Exterior panels, equipment covers, vehicle components, and formed housings with one primary exposed face. | Confirm which face has the ASA cap and whether the specified grade and color meet the application’s outdoor exposure requirements. |
| Double-Sided ASA/ABS/ASA Sheet | An ABS core between ASA caps on both faces. | Provides weather-resistant ASA surfaces on both sides, which can be useful when either face may be exposed or visible. | Two-sided panels, formed parts with exposed inner and outer faces, and components that may be handled or viewed from either side. | Check whether both faces need the same appearance and performance; the added cap layer can affect material cost and forming behavior. |
| Enhanced-Weatherability ASA-Cap Sheet | An ABS core with an ASA cap formulated or specified for the required level of exterior exposure; cap thickness is set by the product specification. | Offers a surface designed for outdoor color and appearance retention while retaining a formable ABS core. | Longer-term outdoor cladding, exterior equipment panels, and parts exposed to sunlight and weather. | Weathering performance depends on the resin grade, color, cap construction, processing, and exposure conditions. Use test data for the specific sheet rather than assuming a universal service life. |
| Textured or Embossed ASA/ABS Sheet | An ASA-capped ABS sheet with a textured or embossed surface on one or both faces, depending on the product. | Adds a specified surface appearance and can help reduce the visibility of minor scuffs compared with a smooth finish. | Decorative exterior panels, covers, and formed parts where surface appearance or grip is important. | Texture can affect cleaning, gloss, and the appearance of formed areas. Confirm the texture and face orientation before fabrication. |
| Colored ASA-Cap/ABS Sheet | A colored ASA cap co-extruded over an ABS core; the core may be a different color or formulation. | Integrates the finished surface color into the cap layer and combines it with the core’s structural and forming properties. | Color-finished outdoor housings, panels, trim, and formed components. | Ask for color and weathering data for the selected grade. Deep drawing or trimming may reveal the core at edges or highly stretched areas. |