| Pole-Mounted Single-Phase | Overhead distribution poles | About 5–167 kVA | Supplies individual homes, farms, and small loads from overhead lines | Compact, outdoor, liquid-filled units are common. Capacity and voltage depend on local utility standards. |
| Pole-Mounted Three-Phase | Overhead poles or pole platforms | Commonly tens to several hundred kVA | Serves small commercial, agricultural, or other three-phase loads | May use one three-phase unit or a bank of three single-phase units, depending on network design. |
| Pad-Mounted Single-Phase | Ground-level, locked enclosure on a concrete pad | Often tens to a few hundred kVA | Feeds local underground residential or small commercial networks | Enclosed construction supports placement in accessible outdoor areas where overhead equipment is not used. |
| Pad-Mounted Three-Phase | Ground-level pad in a fenced or public utility area | Commonly about 75–2,500 kVA | Supplies commercial buildings, apartment developments, and local distribution circuits | Typically includes compartmentalized high- and low-voltage connections; exact ratings vary by design and jurisdiction. |
| Underground Network Transformer | Below-grade vault or dedicated indoor vault | Often several hundred kVA to a few MVA | Supports interconnected underground networks in dense urban areas | Designed for vault installation and network operation; ventilation, drainage, and access are important site considerations. |
| Dry-Type Distribution Transformer | Indoor electrical rooms, commercial buildings, or industrial facilities | Commonly tens of kVA to several MVA | Steps distribution voltage down for building or facility loads | Uses air or another gas rather than liquid for insulation and cooling. Often selected for indoor installations where fire and spill considerations matter. |
| Liquid-Filled Distribution Transformer | Outdoor poles, pads, or utility substations | From a few kVA to several MVA | Provides efficient voltage transformation across local distribution networks | Uses insulating liquid for dielectric strength and cooling. The liquid type, containment, and environmental requirements depend on the installation. |