| Connection at the pipe joint | Welded directly to the piping; no bolted flange or threaded pipe joint is required. | Joined with mating flanges, a gasket, and bolting. | Joined through matching pipe threads; sealant may be required depending on the joint and service. |
| Potential external leak paths | Eliminates the detachable pipe-joint gasket or threaded connection at the valve ends. Other valve sealing points, such as the stem and body, still require suitable design and maintenance. | The flange joint depends on correct gasket selection, surface condition, alignment, and bolt loading. | The threaded joint depends on compatible threads, proper assembly, and suitable sealing practice. |
| Resistance to loosening from vibration | The welded pipe joint cannot loosen like a bolted or threaded connection, provided the weld is correctly designed and executed. | Bolting and joint integrity should be considered where vibration or cyclic loading is present. | Threaded joints may need particular attention in services with vibration or repeated temperature changes. |
| Removal and maintenance access | Removal generally requires cutting the pipe or using a planned removable spool arrangement; valve servicing access should be designed in advance. | Can usually be disconnected by unbolting the flanges, subject to safe isolation and available clearance. | Can be unscrewed in suitable installations, although corrosion, access, and pipe size can make removal difficult. |
| Installation requirements | Requires appropriate welding procedures, qualified personnel, correct alignment, and inspection suitable for the piping specification. | Requires flange alignment, gasket installation, and controlled bolt tightening. | Requires compatible thread standards and careful assembly to avoid cross-threading or excessive tightening. |
| Thermal considerations during installation | Welding heat can damage seats, seals, or coatings if not controlled. Follow the valve manufacturer’s welding instructions and applicable procedures. | Does not require welding at the valve connection; gasket and material temperature limits still apply in service. | Does not require welding at the valve connection; thread sealant and component temperature limits still apply. |
| Common project fit | Often considered for permanent piping installations where a compact, non-detachable pipe connection is preferred. | Often selected where routine removal, inspection, or replacement is an important design requirement. | Commonly used for smaller-bore piping where threaded connections are permitted by the applicable design code and service conditions. |
| Key selection check | Confirm pressure and temperature ratings, valve and pipe materials, end-connection standards, service compatibility, applicable codes, installation procedures, and maintenance access before selection. |